Sonobuoy we have completed the first model.
Let's look at our first question which is related to topics which we have covered in this model.
So we need to make a template in our God what name might template and that template should have architecturally
unique display format also that format should be at a precision of one by fourth of an inch.
Also ensure that inches is selected as the unit and the limit of this template should be set at 50 units
in what degree that action.
So these are different points that you need to keep in mind.
Now let's get back to our AD.
So when you launch or and you reach this zero screen and here in the zero screen you need to launch
it with the default template and start drawing.
And here we have a default template.
Now let's check the unit so I'll type.
Dash B the blue G units and press enter.
Now here you can see that on command line we have one with the angle brackets and also one is four inches.
So we have this unit perfectly said but in case the unit is different here if it is set to 2 3 for any
other well you can change it to 1 and press enter and keep rest of the settings at their default.
Now I'll simply press escape here and now type you in for units and press enter.
So here we need to make some changes.
The first change will be the type of display format which is set to decimal.
We need to change to architectural and also the precision should be one fourth of an inch which is here
the insertion scale should also be set to inches and we'll leave the rest of the options.
OK.
Now we need to make that turn setting.
And in case of setting we were required to set the limits in action to 50 units so I type limits and
Precentor now I'll select lower left corner as you know comma zero as is specified.
So I'll simply press enter and the upper right corner should be whatever value I'll type hundred in
the horizontal direction.
That hardly matters.
But in the vertical direction I'll keep it at 50 and in both cases I'll add this inch symbol to 100
inches by 50 inches and press enter.
So we still have the whole unit the new units are not yet applied to apply them simply type zed for
Zoom and a for all.
Now the limits are applied.
So we have made all of these changes.
Now we need to save it as a template.
So I'll go to this application button select Save as drawing template and I specify the location.
I'll go to stop.
Give it to name selects named as my template and you can see here about the extension preconceive and
with the default description.
OK let's minimize it.
And here we have it.
We have this might template on the text of.