This more you will learn about entering text and tables in order to get a drawing and start with the
single line text.
So in order to make a single line text you need to go to the annotate tab and from here you need to
select the single line text from the text panel.
So when you expand this fly out you'll see the single line text option on the text panel so you can
start the single line text tool from this fly out or you can also use a command equivalent which is
text.
So I started from here and now you need to specify a start point for your text so any word in the drawing
area that will be the starting point for my text.
Now look at the command line and it now prompts you to specify the height of text.
In this case the default height of text is 2.5 as shown in this angle bracket.
So I'll accept this default value so simply press enter.
And now the command line will change to the rotation angle.
And we need to specify the rotation angle in which we want to make the text which I will obviously keep
at zero.
So I'll press enter and take the default value of zero.
Now here we have this blinking cursor and we can now enter a text.
So for this case I'll type Autocad 20:18 And here we have this text in order to exit this single line
text command press enter twice.
And here we have it.
So now the text is present here in a similar way.
You can add more lines of this single line text so I'll once again select the single line can anywhere
it in the drawing area.
But this time instead of selecting the default value I'll click in the drawing area to specify the height
so you can click anywhere in the drawing area and that will be the height of your text.
So let's click on this point.
So the height will be approximately equal to 1.6 units and will change rotation angle to 30 degrees
and press enter.
Now you can see that the text will be inclined to an angle of 30 degrees so let's type text.
OK.
And here we have it.
So you can press Enter once to add more lines to this single line text.
And once again press enter twice.
To exit this command.
And here we have it.
So these are all single line texts.
Now if you want to mortify any of these text entities you can do that simply by double clicking.
So I'll just it is both of these texts and here I'll mortified this text so I'll double click on this.
And now you'll see the same added text window here.
Select the text which you want to defend this case I want to divide this card and I'll change it to
uppercase.
And once you have modified the text you can simply click outside to exit this or obviously can press
ENTER key twice.
All of these properties of single line text can also be modified with the properties Balloch.
So select the text then right click and select properties so that will take you to the property ballot
and using this property ballot you can obviously modify most of the properties related to the single
line text.
So here we have the General tab the 3D visualization and the most important text Dabb which can be used
to modify its properties.
So currently we can see that the height of text is 2.5.
Let's change this value and I'll change it to 4.
And press enter.
And here we have it the height of text has changed.
Also we have a factor that will decide the week in which the text has been made.
So I'll change this word factor to zero point five.
And the complete text will be fitted in the hall of Lent value and here it is in a similar way you can
add an odd blinking angle and that will make this text look like it.
So I'll change it to 20 degrees.
Here we have it.
The object text and in a similar way you can change most of the other properties.
So with these changes I'll close these properties palette.
And here we have this text.
So this was all about creating single line text in Autocad.