In this review I will tell you about the attribute manager tool of Autocad and the attribute manager
can be used to change the properties of attributes in the blocks.
So we have this drawing which we have made previously and we have these three attributes blocks added
here.
Now let's say that we want to change some of the properties in this attribute to block.
For that we can use the attribute manager tool and it can be accessed from this expanded block panel.
So expand the block panel and click on this attribute manager tool.
Alternatively you can also use its command equivalent which is BTD and which is quite similar to bad
man.
So I'll simply type the command and I'll press enter.
So here you have this block attribute manager.
Now in this case you'll see a list of block here on the top.
So here we have these two attributes and blocks.
So if the drawing contains more than two blocks it will be visible in this list.
So I select this window 10 inches block.
Now all the properties are related to that will be visible here.
And you can modify its properties by selecting this edit button.
So click on the edit and we have this edit attribute window.
Now we have these three simple tabs the attribute text option and properties.
Let us start with the attribute.
Now this attribute has all the information which you have seen on the attribute window like the tag
prompt and default value.
Also we have some of the options here on the mod panel so you can change them as well if you want.
Now here we have this tag value.
Let's say that we want to change just tag value and we want to change it to them.
Then also here we have the text options.
Now if you want to change any of these values for example the text height factor and all the other settings
like the justification or the text you can do it from here.
We have some additional properties also for example the leared assignment and the line type and also
the color that you can also change from here.
So let's change this color to green.
And now the auto Preview has been checked.
So that means the preview will directly be visible in the drawing.
Now click on OK apply.
And here we have it.
The preview is visible here.
Now click on OK again.
And the attribute has been updated here.
You can also directly access the attribute manager tool by double clicking on the blocks containing
attributes.
So if you double click on the blocks which has attribute value you'll see this enhanced attribute editor
window now which is similar to that word manager which we have seen.
And here also we have the attribute text option in the properties.
Now in this case also let's change the color so that we make the change property quite visible.
We have the change property visible here.
Now let's click on OK.
And here we have it.
So in this way you can selectively change the properties of different blocks containing attributes.
Now in this case if you want but open the block editor for any of these blocks you can simply select
the block.
Then right click and go to block editor.
So in that way you can open the block editor because simply double clicking a block will open the attribute
editor instead of opening the block editor.
So that was all about attribute manager tool of Bartok and.