OK so here is the question related to the model.
Now here we need to make a room that block as shown in this image and add a room occupant name as well
as a room number as attributes.
Now after doing that insert one of the instances of this attribute would block in the drawing and give
the room occupant name as Alex and the room number as 24.
Now for making this block we have used a hexagon which is inscribed in a circle of radius 10 units.
And the text height of attribute is two point four unit.
And it is using simplex dot æsthetics font
so to make this attribute or block we need to first start with the hexagon.
So I'll go to this draw panel and then select the polygon do not type 6 as number of sites.
Press Enter click at a point then select inscribed in a circle and enter a radius of 10 unit and press
enter.
There we have it.
Now we need to add horizontal lines of line and add this horizontal line in the hexagon.
Now we need to add the attribute values and before adding the attribute value we need to define the
text style as a requirement.
So for that I'll go to this annotation panel expand it and click on this text box.
Now this will open up a text is tight window.
Now here we need to select simplex dot SGX font or the simplex shape font which is here also we need
to ensure that the text height is two point four.
And now apply make this current and close it.
So now our current text style is a blight and we can add attributes and these attributes will beat this
current text to tidy.
So to add the attributes and good Insert tab and now you can define attributes.
Now you can add any diagram to different values.
So in this case I'll add occupant as the tag and name as the prompt and I'll leave this default value
blank and let's click on justification make it the middle center and the text height is already set
here.
You can see this.
We only need to ensure that standard text is tightly selected.
Now.
OK and specify the locations of I'll click somewhere close to this midpoint.
There we have it.
And similarly add another attribute also all you can copy this attribute.
So I'll simply go to Home tab select copy and copy these attributes.
I'll click on this point and I'll copy it below here.
Now let's modify this attribute.
So for modifying this I'll double click on it and we need to change the Dargan prompt value.
So the tag should be room and the prompt should be number or any other value which you want and I'll
click on OK.
So there we have it.
Now we can convert this into our attribute drag block.
So for converting this I'll go to this create block and give this a name.
So let's name it has room tag.
Now select the big point and select this middle point.
Then make sure convert the block is selected and click Select objects and select all of them and press
enter.
Also make sure allow exploring is checked and open in blockaders uncheck and click on OK.
And there you have it.
We have the number and name so the number should be 24 as pearler question and the name is Alex.
OK.
And click on OK.
And there we have it.
We have the attribute your block here with the occupant name as Alex and the room number is 24.