So here we have these three drawings and these are basically road signs and we have them as simple drawing
objects they are not blocks would first convert them into block and then we use those that will depart
from each other.
So for converting them into block click on this create block I can and now give it to me.
So I named the first block as you done.
Now select point and click anywhere in the drawing you need to select the big point.
Now select objects and select the complete set of object here just like this.
And press enter.
Now make sure allow exploding is checked and also make sure that opening block reader is unchecked.
And click on.
OK.
So now first block is ready.
Let's click on Create blog again and let's now name it as a stop and click on this pic point and select
this big point.
Now select object and select all the objects of this a stop sign and press enter.
And now once again you also allow extruding should be checked and open in blockaders should be unchecked.
And click on OK.
Now once again a concrete block and give it a name and I as speed limit.
Now select this point and select the center here as the big point and click on select objects and select
all of these objects and press enter and here also and select this exploding checkbox and uncheck this
open block editor and click on.
OK so now all three blocks are ready and will now convert them into a single dynamic block.
So in order to do that.
Once again go to this create blog and now give it a name.
So I named it as a road sign.
Select this pic point and click on the center of this block.
Now select objects and select all of these objects.
Press enter.
Now make sure clothing exploding is checked and also make sure open in blog editor is checked this time.
And now click on OK.
So now here we have these three blocks.
Now lets overlap these blocks or one another and with the base points.
So here we have it selected.
And from this base point moving to this point here.
OK so now we have these overlapping blocks and we will now apply visibility parameter so that only one
block is visible at a time.
So for that go to this paramita stab.
Select this visibility parameter and click it a point to place it just about there.
Now obviously you need to add an action.
So go to action tab and here you will not find any action at all she added with the visibility paramita.
Actually the actions related to visibility parameter is available here and we can add it from this banner.
So click on disposability States and the default state will become visible which is multistage zero.
So let's now rename it so we can rename and rename it.
Do you turn now.
Click on new again and this time.
Name it as a stop and you're going again and name it as speed limit and.
OK.
So now we have these three visibility's dates.
Let's click on OK.
OK so we have added the three visibility's teeth.
And these states are present here so you can change the visibility stage from the drop down.
But as of now it's not changing anything here in the block.
So in order to make the change we need to hide some of the blocks which are not required for a particular
visibility's States.
So let's go to this you turn state first.
And now here we have this hide and unhide our show and hide options.
So select this make invisible or hide option.
So click on this make invisible and now click on the blocks which should remain invisible.
In this you turn so that should be all the blocks except you don't block.
So let's click on this block and here in this case you can see that we have some overlapping objects
so the selection may be a little bit difficult.
So in order to ease this process you can turn on this selection cycling option.
And if you're not seeing this election cycle option on the status bar go to this customization and select
this selection cycling so this should be checked and then you'll find this option here.
So turn it on now when you go to this option.
Whenever an overlapping object appears a list containing all of this object will become visible just
like this.
Now you can easily select all the overlapping objects.
In this case we need to select the first one and press enter.
Now to make invisible again and select the stop sign and press enter.
So now all the blocks which are not required for this visibility's date are hidden.
So let's not change the visibility state to stop.
And in this case we need to hide all the blocks except the stop sign.
So once again go to this make invisible and you can this U-turn and hide it.
Now go to this make invisible and click on this eight letter so that speed limit can be selected easily
and hided.
OK.
Now let's go to the last visibility's state which is a speed limit.
And in this case when to hide every block except the speed limit.
So select this invisible option and click on this U-turn press Enter selected again and this time select
the stop sign and press enter.
So now here we have it.
Now let's test it.
Let's go to this U-turn.
Let's go to stop and speed limit.
And yes it's working.
So let's now see if the block hand closed block editor.
And here we have the block so we can now does this block as well.
So let's click on this group.
We have this U-turn.
Let's go to stop and yes we have the stop sign and when you click here again go the speed limit we have
the speed limit sign.
So now in this way We have easily added the visibility paramita to a dynamic block.