So now we have seen lots of paramita and actions in the dynamic blog and they been fairly simple.
Now let's look at a little bit complicated action.
So here we have this blog a simple blog.
And we have made this with the name table set here.
Now we have inserted a copy of this blog here.
And you can see that it's a mirror image of this original block.
Now we want to make a dynamic blog in such a way so that a copy or an idea of this complete set can
be made in horizontally as well as in what direction.
At certain intervals.
So for that go to this create blog and I'll give it to name.
So Al-Naimi does address it and select a point which will be this point in this case.
Now select object and select both of these objects.
Presenter.
Now make sure our exploring is checked and also make sure open and block editor is checked.
OK.
So here we have these two blocks.
A full list and the second one.
Now go to this paramita us and select this x y paramita now especially specify the first point for the
expert.
And now you'll notice that we can directly specify the x and y coordinates of the end point which began
dynamically click add this drawing area and specify or we can also and the discordant need the help
of Gardini values.
So I'll do that so I'll type at two thousand for the x coordinate value and minus 23:00 for the way
you we're entering a negative value for y that it can because it's pointing downwards.
And also we have added an add sign to add an incremental or a relative value.
So let's now press enter.
And here we have it.
Now this is the point which we haven't specified with 2000 is X and 23:00 as y.
So now let's go to these actions and also look at the action.
Now we need to select the parameter which is this bad meter.
So click here and now we need to select the objects which is these two objects and we also need to ensure
that this parameter is selected here.
And now press enter.
So now we need to specify the distance between rows which is 23:00.
In this case and the distance between column which is 2000 in this case and now press enter and we have
this blockade.
So now let's test it.
And in order to test this click on this test block and now click on this block.
And now we have these additional groups here.
So using these groups you can add the ID all the copies of this additional object.
So let's click on this group and move it on the right side and you'll notice that at an interval of
2000 unit a new block is added.
And you can click at any point to place it.
Also when you click on this group or when you click on this group you can add multiple rows at a distance
of 23:00 as we have already specified here.
In order to add rows and columns directly you can use the third group which is this one.
So using this group you can not only add the rules but you can also add the columns like this.
So in this way you can add Adye action to the dynamic block.
So let's now close this test block window and let's see if the block and close the block editor.
And here we have the final block which can be now used here.
Just like this.