So now we'll learn to create the Karlo block and for the blog.
I'll start with the rectangle tool.
So I'm using the same drawing in which I have created the label block.
I'm not selecting any new drawing.
Now click anywhere in the drawing area to start this rectangle then type at point five point five.
And there we have it.
Now I'll go to circle and I'll select three point three midpoint of this rectangle.
I selected all and and rotated so rotate the center and click on this word X right there.
Now we'll add a line here so I'll go to line and add a single line like this.
OK.
So let's add Hatcher's to hatch and then select solid badan.
Also in this options panel I'll MHR create separate hatches is selected.
So that's an important option.
Make sure it is selected.
Now click on this first area.
The second and third.
So now we have added three hatches but they will act as three different hatches.
We have added them in a single run but still they will be here as three different objects click on PLOS
creation.
Get rid of this rectangle also get rid of this line.
Now I'll go the line again and create a new line that starts right from there so I'll just track that
center.
Click on this and point in this point.
There we have it.
So now the out is prepared but we need to again add some attributes.
And here again we have the same fields because we have used the same drawing so we have the fields we
already have the existing label block.
So let's add other attributes so ADT press Enter now here in the top I had a few numbers so we numb
and let's name it as View number and the default value again.
Field sheets it placeholder view number none.
OK.
And since we are adding it in the centers of select middle center.
Okay.
And I'll try to click at the middle center point of the top quadrant or the top half of the circle.
Now press enter to repeat this.
And he'll add sheet numbers so let's type as I'm.
And this is a sheet number once again feed.
And this is sheet number.
OK.
And medical center.
OK.
And so they were here.
There you have it now will again converted into a dynamic block.
So let's go to create block.
Let's name it as call out block.
Big point should be the center.
Select objects everything.
Allow exploring opening block area checked.
OK.
Well again that will take us to this block editor.
Now here we need to add two different dynamic properties.
We want to rotate these arrow heads arrowheads for that we'll add the rotation barometer so I'll go
to that rotation parameter.
Click on the center and click here and again here.
So that will add the rotation pattern meter.
And if you're not aware of all of these tools then I suggest you to go to that dynamic block section
of this course and complete that section before coming to this set.
And if you've already completed the dynamic block section this tool must be familiar to you.
OK so now we need an action so go to action select rotate select this one.
And now we need to select the objects which you want to rotate so you want to rotate these three arrows
only including this barometer.
Now press enter and that's it.
So the rotation parameter is added but we want to restrict this rotation to 45 degrees.
So I selected right click go to properties.
Scroll down and here and the angle type and select increment and the increment of 45 degrees.
And there you have it.
So now this will only rotate to an angle of 45 degrees you can see these in tags here.
Now we need to add another barometer and that's visibility's a good barometer select visibility and
click Sambir we're here to add the visibility paramita.
Now it's our divisibility state.
So click on this and we need three states one for Section One for elevation and one for detail.
So first rename this.
And let's name it has a section in New elevation and again a new That's the deal.
And click on OK.
So we have the visibility States added but we need to add the relevant visible information.
So let's go to section and this is how the section block looks.
Now elevation and elevation we should not have these two arrows.
So we'll hide these two arrows so I'll go do this.
Hide
select this one this one and enter that's hidden.
Now let's go to detail and in detail none of these arrows are visible.
So I'll go to this again.
The hide option select all the three arrows press to look at this.
Now everything is gone from that detail view.
All right.
So we have a block let's close block editor save the changes and there we have it.
Let's test it.
I selected look at this we have this crib.
Let's go to elevation and that's called the arrows although it is not visible properly but here it is.
If you go to deedle that area is also gone.
And let's bring it back.
Let's go to section.
Now we have this rotation group and look at this and now we are able to rotate this one to an angle
of 45 degrees.
Let's get rid of this as well and we still have that cloud blocking label but we have an extra close
blank.
Well let's get rid of that.
So I'll type Berge and expand this and well this is level block and Carla block.
We don't need this close to blank.
Let's right click and select Berge there we have it let's close it.
And now we only have the two blocks which we need level block and color block.
Now with these changes I'll see if this drawing so I can save as I'll go to the same folder SSN and
I'll give it a name.
So let's name it as blocks and save it.
So our blocks are all prepared.