All right so we have created all the sheets and we've added different views with the label blogs and
we've added different views with the label blogs and other information.
Now let's reference them with one another using the cloud blocks and I'll start by adding our blog right
here in the plain view.
So let's go to the east elevation and here in the plan you will add the east elevation so this is the
east side of West North and South.
But right now you know that but the end user is simply not able to figure out the direction simply by
looking at the drawing.
So you need to add an appropriate block.
Now for that Anquetil design center first so press control to click on this home I can then in Ewis
Design Center and now we need not direction block that you'll find in the landscaping blocks and there
it is.
There's the not Arrow select and drag and drop it here.
Well the size is really big.
And so on selected and on scale click on this point and I'll decrease the size and scale it down to
zero point zero 5 and enter what we need to do that even further so I'll go to scale again selected
and select this point in degrees or 0.3.
Well that seems appropriate So let's selected move and let's move it right here.
Now that well-specified is not a direction but just pointing in the upward side.
Well now we can go to East elevations so let's go to East elevation right click and select place called
block select color block.
So since we have already defined the Carlat block Odegaard will fetch that information from the sheet
set and look at this.
Now we can just place a block that information will be added.
OK.
And here we have the view number one on sheet 8 2.
So on Sheet view Number one is the east elevation that's directly mentioned here but this is a section
called out so I selected click on this group and change it to elevation.
Also the direction should be pointing to this site.
So select this grip and rotate it by an angle of 90 degrees.
So now all of those dynamic tools are working here and now we are able to appreciate the significance
of the properties which we added in this dynamic block so that's the reason why I created the dynamic
blocks this color block with all of those dynamic properties.
All right.
Now let's add one more.
So I go to front elevation and I'll add another color block right here and.
OK.
We don't need to rotate it simply change it to elevation.
That's it.
And let's add the section called also so easy to a section right click block.
Let's just play it right here.
OK.
Now that's the section called out that's fine but we need to have a section in line for that and good
line tool to click right here and add the sectioning line and create the tail.
Well we'll just delete this deal and we create that with the help of polyline select polyline and create
this tale here.
Now this state should have some thickness or double click on this little word and add a word of zero
point zero five.
Press enter.
And that seems appropriate.
So there we have it.
So that's the word now.
This section line is actually passing through the window so if you go to the section drawing Well if
you want to go to that you can simply double click here or you can go to shitlist and go to that directly.
So here I'll go to that east west section so I just double click on this and look at this it will take
me to that section here east to a section.
Now look at this here.
In the kitchen it's cutting that window.
So by this I can simply reference that it will cut that window.
But here it's not cutting the second window which is on the end of that room.
So with this I can infer the line the section in line.
So now once again I'll move back to the plan view and here in this case this is the first window.
So the line of sectioning should pass from here and it should go like this because it's not getting
this window.
So I'll just select the sectioning line and this one can move and move it in the right part like this.
So that's sectioning line which has been added.
OK.
And that's how it is referencing it to that drawing also.
So you have no added section.
Now if you have any detail view which you want to add then you can use the detail color but since we
don't have that call out you know a drawing that won't be needed now.
Now if you want to check that whether this thing is appropriately pointing to its correct drawing then
just look at that once again.
So here we have you number 0 3 on sheet number.
Easy to do and that should be this east west section.
Well let's check that.
So let's go to 0 2.
Well this is as you are to drawing and the number was three.
And here is the view number three.
And that's definitely EastWest section and there it is.
That's the east to a section with its proper scale.
And there we have it all the information.
Similarly you can just go to plan view and look at the other ones.
For example the east elevation it should be easier to view.
Number one again is to be.
Number one East elevation Similarly for the front elevation.
And if you want to add the foundation somewhere if you want to add the reference of this you can do
that as well.
Right now we don't have any place to add but in this case we'll do that as well.
So let's just zoom into this area and let's zoom that.
This is extending way beyond this area.
And this is where we have the foundation and this is the foundation which we actually created.
Now the reference that we will first add the call block for the foundation so I'll go to this foundation
plan well which we have right here.
Then right click and select place called block and let's place it right here.
OK.
Well we need the detail call out although we are not adding the detail view but still just for the sake
of simplicity I'll do that.
And if you want to show that foundation plan if you have this foundation planned right here and if you
want to show it in detail then you can add this detail call out.
And now we can add the foundation plan right here instead of this and trying if you want or if you have
added it even here that's also completely fine because right now it's referencing to drawing number
E-3 rule number one so that is still fine.
Now since you added the detail view you'll need to add the reference line in the area so we will create
this box and this is the part which this thing is referencing to this color block is referencing to
now I'll go to Phil let radios click onto points very close to one another.
Select polyline and add filter selected and I'll give it some line type Well we don't have any so we
need to first add it so load.
I use a dash and let's select it and let's not add a dash.
Well we need to change the properties we need to change this scale.
So 0.05 and maybe even smaller
and with the scale of the 2.00 one we have this here and now let's add a line so I'll go to the line
tool and connect this line with this.
Detail call out and again in this case also I just assigned the same line type and the same scale.
And there we have it.
So now this is our foundation plan right there we have the foundation and this is referencing to the
DDL view on sheet easy to review number one.
And again if you want to just look at that just go to the foundation plan and look at this.
That's sheet number 3 on view number 0 1 and we have the foundation plant the required Foundation plan
here right here.
So that's all different kind of information can be interlinked with the help of sheet's it and we have
now a sheet said fully prepared and we can now plot this or we can then be transmitted and we can send
it to other stakeholders and clients if required and that we'll learn next.