This read you will learn about the design review too which is a tool that can be used to review the
drawings add mock mockups and share that mock up.
Now to use that tool I use the sheet set which we have created in this course so I'll have this as his
final folder here.
I just opened this and look at this.
We have everything here.
Now let's open this House plan DST file past the sheets at file right Glegg and open it up to God.
Now this will open the sheets.
And now I'll publish this sheets it but not as a PDA file but as to if so publish publish to dwarf or
DWF.
Now let's go to the next stop as I said final and here I'll save it.
So House planned dwarf and select not to publish it in the background so I'm publishing it as a file
because it is designed to can open the files easily and the mockups can be added there.
So if we process it in the background and the moment it reaches the bubble that the publishing job is
done.
So let's wait for that.
And here we have it.
So that is not published Well let's minimize the drawing and let's go to this file so here we have it.
So that's the twip file which we just now created.
Now to open this file in the order it is designed for view tool you need to have access to that one.
And that's a completely free tool you can go to the artist web site and install that tool.
It's called Autard is design review.
And once it is properly installed you'll be able to open this file.
So now double click on this and it will open this Autodesk and design review to the and look at it.
So now the school opened the drawing like this so we have to lay out which recreated you need to go
to this list view.
It might open this mock up stops if it isn't the mock up top.
Just go to list view and it'll show you all the layouts that we have so we not right now is 0 1 Blan
easier to elevation and easy to Threet foundation.
So we have these three sheets.
Now if you want to add mockups here then well you can simply do that by these bandos Sylvia.
So here we have these Bannon's and we have a lot of different tools like the formatting call outs and
to draw tools measure as well at this time symbols.
Let's start by adding some call outs so I'll select elevation and here let's just swimming a little
bit.
We don't have the foundation but this cloud is pointing to the foundation.
We know that.
So let's add that marker that we need to have the foundation and the doctor simply forgot to do that
or whatever the reason might be.
So we just want to remind the drafter to add that.
So for that I'll select this option the rectangular call out.
Now I'll make this a rectangular all out right here and just look at this.
So this will create the bubble and now the text so here will add add Fondation here just click outside
to complete this and let's zoom out a little bit.
So now we've added it.
But even after adding this you can still modify its location if you want.
If it is not clear you can just do that or even you can modify the size of this cloud.
If that's something that you want maybe we just want to decrease the size of this cloud like this may
be a little bit like this.
There we have it.
Now we want to add the foundation here.
Now we have added this.
But what about the text.
Let's say that we want to change that although the size of text is really very large.
I mean we want to change the color for that double click on the box select the text.
Now go to the formatting panel and look at this.
We have this text formatting option from here you can change the size of a text right now it has 15
points you can select small a value to make it small.
You can change the colors to any of these predefined values.
You can make it bold if you want.
And now let's click here and look at this so the formatting has changed a little bit.
To reference this cloud to this part of this section view as well.
Now that will add an hour or so for that I also like this and char tool and I also like this line.
And now I'll go to this point and I'll add it like this.
But here we have a problem and we're adding this line.
This is a two sided arrow.
By default it might look like a simple line also.
But we only wanted to start from a point and and add an arrowhead.
Now for that you can change the formatting from here for the line.
So from here just change it to none for one of the ends and for the second and you can select the type
of Arrowhead which you want.
Now press escape let's select this arrow.
Get rid of that.
Delete it.
Now I'll go to the line again.
Click on this point right there.
And now we have it here to look at as it is now pointing to this side as well.
Maybe if you want to change the color of this simply selected and change the color to red.
If you want to change it's worked well you can do that as well maybe to 1.0.
Well that's very small.
That's very light.
So I just change it to two to five points.
And there we have it.
So that's how you're going to have the formatting.
If you want to add text while we have an option for this also.
So let's add a text and well that's the text which you want to add here.
Now maybe we want to include it in a cloud also to highlight this.
For that you can select this cloud option and just make a cloud like this.
Well we want that.
Now that's something which you can do here but once you do that just look at this mock up panel here.
So we have this markup tab.
And in this panel all of these mortgages are automatically added.
So initially we added this add foundation here.
That's the markup if you click on that and we take it to that view we then added the line then we added
text.
And lastly we added the cloud.
So as soon as you add any markup it will simply show up here in this list and along with this we have
a lot of other information also let's let the first one add foundation here.
So that's the first markup which we added now with this mock up.
We have these properties also.
So these properties will be associated with the markup.
So here is the label add foundation here and now if you want to add more additional or not in the drawing
but somewhere or here so that the drafter can only see that and it simply keeps you are drying clean
and you want that then you can add any additional note here.
So maybe we want to add we want to add this note review of the changes in section view and we want to
change the status to for review.
Now this one this markup is for review.
And now we can save this drawing.
Well so you had no say of destroying.
Now this drawing can be send to the drafter or the designer who has created destroying and he or she
can simply open the drawing.
See these mock ups again and act upon those markups.
So once those issues are resolved they can go here on the status and change it to done.
Well there you have it so that's done.
Maybe they have completed that and they want to show that state is like this and then they'll just save
the drawing and send it to the original reviewer then they they'll just check it.
Right.
And when they are satisfied they'll simply approve the drawing.
Now before approving the drawing let's say that the approver wants to check some of the dimensions of
the drawing so here we have the tools for that.
Maybe he wants to check the length.
So select the lint option and now look at this.
So two point and there we have.
That's 51 feet approximately.
Well we'll click on this point.
And then this point and that's 15 feet 4.6 inches approximately.
So that's how you can check the lens if you want to check that angle.
Then select this option.
Now select the first point.
Second point third point and press Escape key.
And then we have two that's 107 degrees if you want to check another angle you may be here and select
these two points.
Press escape and there we have it that's 50 degrees angle.
So in this way you can select different Barram just here.
And if you want to check the area then you can simply go to the plan you or any other way you will where
you want to check the area select the area and you can check that as well.
So here I'll just go to this room and look at it.
So that's a 3:43 square feet approximately.
Now in this case the unit will be the default unit of indrawing but for whatever reason if you want
to change that unit you can do that simply from this measure panel to expand the panel and select this
option to the unit and scale.
Right now I can see that the drawing unit is 15 inches.
Well maybe you can change two meters if you want but when you change it to me just make sure that you
change the display unit to similar value to avoid confusion then.
OK.
And look at this.
It simply changed that value 4 9 4 0 0 0 meters square so it's no longer showing the value in fit in
inches.
I just press control-C to get back to the origin values.
Now in the mock ups these dimensions will be added additionally like this.
But obviously these dimensions are only for your reference and you don't want to include in your final
markup so if that's the case then you can select the damn engine and right click and delete it so you
can simply delete these dimensions from your mockup.
But if you want to keep this here in the drawing and if you want to add and Order with this dimension
or this angle in this case then you can simply added and add the note.
Maybe we want to change this angle.
There we have it.
This should be 45 degrees or whatever angle you want that.
Once again we'll just change the status to for review and we can see if the drawing and send of a drawing
for review.
Now once all the review process is done and you're satisfied you can add this time stamp like approved.
Maybe if you are sending a drawing for review you can add this stamp also for review.
So these items can be added to your drawing to avoid any accidental submissions of the drawing for example
if your drawing is still in the review process then you would definitely want to keep this for review
stamp in your drawing so that anyone can simply recognize the type of drawing now in this case and just
decrease the size of this dam or double click and select the text.
And let's just decrease the size of this text as well.
And there we have it.
So you can add these kind of stamps also and you can do a lot of different things with this order desk
design review.
So that was all about Autodesk design review to.