This video I'll tell you about making this simple to the drawing.
And for this I'll start with the LINE command.
So I'll go to this line.
Come on.
On the job.
And even in the drawing it at to start line.
Now I'll make sure that my line is horizontal and when the line is always on to this green dragon recto
will show up if this green tracking vector is not visible in your case then go to the status bar and
select this Bueler tracking.
So this should be on if you want to keep this green dragon vector visible.
Now you can enter the land or the first line so Altai 46 and press enter.
Well there we have it.
The first line of lenth 46 unit.
Now we need to enter the angle.
And in this case you can see the angle is a hundred and forty four with respect to existing light.
Well Odegaard always measures angle with respect to positive side effect axes and in anti-clockwise
direction.
So in this case to find the angle you need to subtract 144 from 180.
So that will be 36.
So let's dive angles right now.
This will add your angle value instead of the land and then takes and press enter.
Now look at this.
The line will be restricted to this 36 degree angle and now we're going into the land which is what
you do and press enter.
Now you can move up forwards and into the length of the unit.
Press Enter now moved to the left and this length is 20 unit and you can find this length with the damages
which are already provided.
Now I'll move in the opposite direction then enter move to the left 30 enter move downwards to a distance
of the Dean enter move to the left by 44 unit move downwards by eighteen point three four unit
and then just leave your cursor.
Well now I'll press enter and I will start from this point.
Now I had a line of line nine point seventy eight and press enter.
Now I'll simply join it with this line and that completes or trying.