So now a float plan is almost prepared you only need to add the dimensions and we need to plot this
fine layout.
So right now here we don't have any damages added in the drawing and for that I'll go to this annotation
expanded.
And here we have this damage and style manager to click on it and let's change the damage in style.
So I'll go to this standard.
And as you can see that we don't need that one because we don't have the feet and inches can mention
here.
So we'll make it on dimensions time because none of these damages tiles are as part of our own requirement.
So I'll go to this I of to five and now I'll click on new.
So that'll make a new copy of you.
So 2:05 let's give it a name so I'll name it as dim and click on continue.
Now we need to Jane some better too.
In this case.
So I'll start with this symbol and arrow and Aldin the arrowhead to this architectural trick.
Also here go to text hangi and text placement to sintered that's the one which I prefer also.
I'll go to the Fit tab and here we don't have to change anything.
I'll go to the primary tab.
And here we need to change this one to architectural So unit format should be architecturally in this
case.
Now that's the change which freed acquired from now I'll click on OK.
Close.
And now I'll start by adding the diamond sions.
So I'll go to this linear dimension and now click on this point.
And before that we need to change the lid.
So yes make sure that you change the lever to Dim.
All right.
Now click on this point click on this point and add the damage.
And we have some problem here that size of dimension is very small that we need to change.
So once it can go to annotation this damaging style manager select them modify tab changes overall size
to Phife OK and close.
There we have it.
Now it's quite clearly visible.
So go to damnations again and as you can see that because of these Hadjis we are not properly able to
see the point where we are actually clicking so we can hide these Hodge's temperedly for a drawing.
And for that I'll go to this drop down and click on dislikeable icon right next to this Hatcher's.
So that will hide over Hodge's as of now.
Now we can once again go to the diamond Chian and we can address the dimensions.
So here we have it.
The first one.
Now the second one should be here.
All right.
Now let's go to the next one.
Let's add this here.
Go to this damage and again and let's add it properly here you can zoom into this area if required.
All right.
Now headed here.
You can take a reference here.
And you only need to add the dimensions which are required you don't need to add additional damages
which are not required or which are redundant.
So here this should be added the element size and here also we need to add one more damage in here.
So I'll go at this point and this point and I'll add the diamond in here so I'll move this one Cupido
here and this one a little bit more here.
So there you have it.
So we have all the basic damage in place and these damnations are sufficient enough to specify all of
the room sizes in this floor plan.
Now you only need to add a fine note and we can use text tool to add that final note.
So let's add it here.
OK.
So let's type exterior wall thickness is 10 inches and indeed your world weakness is six inches.
So that's the note which we need to add in here also eigene the size to one unit or one fit and press
ENTER click outside and the note is now added here.
And obviously we need to change it to the text.
Here it is right on the diamond chin as you can see clearly that Galeries seems like this one click
on the drop down and change it to text.
And now it's on the text layer if required you can highlight this note and to highlight that you can
select it and use this bold option.
But obviously in case of simplex font you cannot do that because that's a single line font.
You can do that with a true type font.
Obviously.