In this field you will make this to the drawing.
So let's start with a simple line too.
So those line command and click anywhere in the drawing area and make a straight line with lint off
to 30 units and presenter.
Now presenter again to exit this command.
And now go to the circle tool and click on this end point of the line and make a circle with radius
of 11 units and present it.
Press enter again and go to the CMS entry point and make another circle with three tiers of nine units
and presenter.
Now let's zoom into this area once again and make another circle with a radius of four units here.
So let's say for and press enter.
Now here we have it these three circles.
Now let's go to the line tool again and click on this midpoint and make a line in the downward direction
with a lead of seven units and press enter and presenter again to exit this command.
Now we copy this complete concentric circle geometry and been copied from this central point and then
copy it to this point and to this point.
Now let's go to the circle tool again and click on this point.
The central point of these concentric circles and make another circle with three areas of 17 units and
Precentor.
Now let's go to the circle fly out expand it and select this tangent tangent radius option.
Now click on this circle and then on this circle and enter a radius of 200 units and Precentor.
Now we need to trim this extra portion here so far that like the stream to press enter and click here
to remove it.
Now we can make a mirror image of this for that selected.
Now go to the mirror to click on the center point of the circle and then click on this midpoint and
Precentor.
Now we need to offset this one to a distance of 22 units so far that as the offset tool and ENTRAR distance
of 22 units.
Press enter.
Select this geometry and click upwards.
Repeat the process for this arc as well.
And now we need to add Fielitz or that here we have this Villette selected and entered a radius of five
and so type on enter 5 enter and select the multiple option.
Click on this and click on the circle.
Repeat it for this arc and this circle as well.
Now press enter to exit this command and now we can remove all the unnecessary geometries which are
no longer required.
So we don't need this line.
And we also don't need this what line
now let's go to the line tool once again and track this point this quadrant and click anywhere close
to this point and make a straight line like this.
Now go to the offset tool and enter 20:7 as the offset distance and click on this line and make an offset
here.
Now go to the offset tool again and this time enter a distance of 50 units.
Press enter.
Now click on this line and click on the right side and press enter to exit.
This offset tool.
Now go to the trim Command press enter and trim all the extra edges here.
We don't need them here.
And also remove this line.
It's also no longer required and go to this offset tool once again and entered an offset distance of
11 units.
Press enter and make another offset of this arc here.
Now we need to rotate these two lines with respect to this intersection point for that as like this
rotate command and now select this line and press ENTER not click at this intersection point and enter
an angle value of minus 15 unit and press enter.
Now go to this date come on again.
Click on this line.
Press enter.
Click on this intersection point and enter an angle value of 15 units and press enter.
Now we can remove this out.
It's not required anymore and we need to make more offsets here.
For that I'll go to this offset to an entry offset distance of 3 unit press enter.
Click on this arc and click upwards.
Now click on this ARG and click downwards.
And now we need to make some Fielitz So go to the filler tool.
Click on this radious option and enter Radio 1 unit.
Press Enter now select this multiple option and now click on this line.
Then this ARG this line and repeat the process for all of these four edges.
And here you have it.
Now we need to make a mirror image of this on this side so as select this complete geometry go to the
mirror tool.
Click on this entry point and data upwards and press enter.
Now we need to remove some extra portions here for this circuit so I'll go to the stream to press enter.
Now click on this part and this part and we have it the final to the geometry as part of a requirement.