OK so now we have completed this model now we need to make this and drawing using all of the commands
and tools which are thought up to this point.
I'll start with the polygon tool and here on the draw and then expand this fly out and set the polygon.
Now we need to select three sites because we want to make a triangle to select three and present it.
Now we don't need to specify the center point.
Rather we need to specify the edge lens of select edge and click at any point and then the next point
the next point will be of nine unit length.
So Day 9 and press enter.
So there we have it the triangle.
Now we need to start with the circle to go to circle on this point here and make a circle with a radius
of three unit and press enter.
Now press enter again to repeat it.
And now on this point and enter a circle of radius 2 unit and press into it.
Now you can make another circle at this point or you can copy the existing circles and select copy select
the circle press and click on the midpoint and move it on this one.
Now press ENTER or cancel.
Now we need to join both of these circles with the help of a circle which is tangent on both of them
and we can do that using tangent and intermedius because the radius is also provided.
So the fly out and select tangent tangent radius.
Now the proximate points where they are touching the first and the second point and a radius of three
unit and press enter.
There we have it.
Now we can repeat this command and we can do it here also Or we can make a mirror image.
So I'll make the mirror image.
But before that and trim this.
So will the trim press enter and trim this portion.
Now we can make the mirror image of this small arc so selected click on mirror.
Now click on this central point or the end point of triangle and join it with this midpoint and press
enter.
So now it is joined now for this side we need to join it with a straight line.
So I would like to add this quadrant and I'll join it with this quadrant and press enter.
Now we only need to trim all the extra portions.
So the first thing is this triangle which we need to delete.
So I'll delete it and I'll go to trim presenter trim this and these two portions.
There we have it.
The final drawing as a requirement.