So far we have applied different properties you know it took a drawing and in order to check the properties
which are applied on the object you can take help off property pallet so the property can be accessed
simply by right clicking anywhere in the drawing area and selecting the property options or obviously
we don't have the property option here as none of the object is selected.
Now in order to make the property pallete active you need to select the object first.
So in this case al-Sadeq the object.
This part of the object.
Then right click select the properties.
Now we have the property option.
So this is a simple property pallet and you can obviously stretch it contracted you can change the size
of this property pallet.
Also you can scroll down here to see even more values.
And if you want to you can even dock it to the side of this Windows or any move towards this side you'll
notice that it will automatically dock here.
Now we have the property pallet always available here.
Now this property pallet is displaying the line properties of seven lines which we have selected as
you can see here.
So we have these seven line selected and all of these properties are related to those seven lines.
Now let's press Escape key and now we don't have any selection here so let's elect any other object.
And in this case I select this object here and now this is displaying the property of this particular
line.
Similarly if you change it to let's see the circle it will only display the properties of that circle
as you can see here we have the circle now.
So in this way you can check the properties of different objects using the property ballot.
Now you can also undock it here just move it outside this corner.
And here we have it.
Now let's look at the properties which can be seen using this property ballot.
So in the first situation we'll have a look at this part of the drawing.
So here we have applied the yellow color so let's select these lines.
OK.
Now let's look at the property ballot so we can see that the color has been applied as yellow and here
using this property banner we have applied the yellow color so that the same property.
Now if you want to change the property from here you can do the data.
So let's click on this and there will be a dropdown menu just like this.
And you can see the seam dropped on menu here also when you click on it you have to see him dropdown
menu.
Now we have an option of more colors here.
Select color and we have to select color window which was also available here.
Now from here let's change this color to green.
OK.
And you can see the change here the green color has been applied.
So you can change the properties of any of these objects statically using the property palette and also
using the properties panel.
Now let's press control Z to get back to the original properties.
Now we have also changed the properties of these lines.
So here we have this line and we hatchings the line tape of this line.
So let's look at this line.
And now here on this line type option you'll see this Aycock dash line type.
So let's get this job done and now you can again change the line type if you want from this list.
But in this list obviously only those line types will be shown which are loaded in the drawing so if
you want to learn any other line type click on this other and you can load it.
Also we have the line type of point zero for which we have all seen.
You can obviously change this value if you want according to your requirement.
We also have some other properties for example the layer which we will look in a moment.
So you can Gene the leader of this line from this dropdown and there are also other options.
For example the lead panel from there you can change it and we'll obviously look at this in the upcoming
models.
Now let's look at one more option here.
Let's press Escape key and here we have the line which we have a black the line which selected.
And now we have the line bit option which is point 3.
Obviously you can change this value also.
So let's change it to some other line.
And we have it here.
So this line which is now changed you can compare it with the remaining line which is.
So we not only have these many properties we also have some additional properties here.
So let's not change it once again back to point 3 line.
So I just crawled up Virts change its value to point 3.
Now we can also see some other properties related to these lines or other geometries For example let's
zoom into this area.
Now here we have a circle let's elect it.
We have all the properties now which are related to the circle.
Now let us scroll down.
And now let's look at the geometry panel here.
Now in this dormitory panel we have some very important for mission here.
For example the radius which is fifty seven point five for this circle the diameter Sercombe France
and the area.
So these informations can be directly accessed from the property panel.
You can not only access these options but you can also change these values.
So for example in this case let's say that we want to change the radius of the circle from fifty seven
point five to let's see if the select let's 50 press enter and you will notice that the radius of this
circle will change in this drawing also.
Similarly if you change the value here the new property or the new value will be updated directly here
in the property.
And also you the radius the damage and all the related values will get updated automatically.
So let's press Escape key and press control Z.
Now this is one way of accessing the properties of any object.
There is also one more method of accessing the properties and you can do that by LIST command.
So you know so I'll select the same circle.
Now let's assume that we want to find its properties.
You can simply select the object go to this properties panel select the list option and here we have
it almost all of the properties which are quite important for example the radius components in the area.
And you can see these properties Obviously you cannot change these properties from this list but you
can take a reference of these values Ventra wide.
You can also match properties of one object from your drawing to the other object.
For example in this case we have this transparency applied on this part of the geometry.
Let's assume that we want to apply the transparency the same transparency same color and all the other
properties on the part of the geometry and in this case we apply it on these lines.
So for that you need to use the match properties command and the shot good for match properties is and
he who simply type M E which is short for match attributes or match property you can see now press enter.
Now select the source object which is this one obviously.
Now select the destination object and on the destination object and the properties will get applied
on those objects simply go on and click on those objects and the properties will be applied just like
this.
Press enter when you want to exit the command in a similar way.
Let's say that we want to apply the seam line type here the line which is applied here and with the
same line type width and the line type scale and everything.
All these properties you want to copy from here and you want to paste it on this line for that again
we can use the match properties come on to type and the press enter.
Now click on the source object which is this one.
And now that you go to the destination object and keep on clicking and the same properties will be applied
here just like this.
It's quite easy and also a very handy tool if you want to apply lots of properties.
So in this way you can transfer the properties of one object to another.
Very easy using the mesh property command.
And that was all about the property settings of Autocad drawing.