OK so here is your question related to this Madian you need to create a circle with radius 500 square
with site five unit length and a triangle with Azlan to 5 unit.
Now meet three corresponding layers teleosts with name radius three layers with name circle square and
triangle and place these objects on the respective Lears.
Now assign a red color and I use a dash line type to layer which contains circle and a line of point
five to the letter which contain square and triangle.
So let's start with the geometries first.
So I'll go to circle point and make a circle with five inch radius.
There we have it.
Now let's zoom out.
OK.
Let's go to rectangle.
Please get a point and make a rectangle with length 5 and a bit of 5 so that we make a square.
And now the top geometry which will make fit polygon Sinek polygon.
Now a number of sites and 3 and press and did not specify a center which would be anywhere.
Now we need to specify the Edlund.
So click on this edge option and click at any point here and specify the as length as five unit and
press enter.
So there we have it all the three geometries.
Now we need to make corresponding lists for that and go to our properties manager click on new and give
it to names or let's say the Mutazz circle make second layer named Dan square and make 30 year named
Vitesse triangle.
Now we need to put these objects on the respective layer for that close Display Properties manager.
Select the circle.
Click on this and dropdown and select circle L'Express escape.
Now select this square and drop down and select a square and once again press escape.
I select the triangle click on the drop down select triangle and press escape.
So now we hammered objects and we have assigned them on different layers.
Now we need to change their properties but using the Llyr properties manager so in the first case we
need to assign a red color and Ieyasu dash line type to layer containing circle.
So go to the properties manager again.
Go to the second layer and assign red colors on color box select Red.
Click on OK now scroll Liebert here.
Here we have the line type.
Click on it and we don't have any line tape here so I can load and let's load.
I use Subash which is here.
OK select I use a dash.
OK and there we have it.
I use a dash that's loaded here.
Now you can collapse this to see the effect.
And there you have it.
Let's now bring it back now.
I'll change the second and third properties which are related to square and trying the lead.
Now in this case we need to change the line with 2.5 for both of these leaders.
So here we have the line right click on it.
Change it 2.5 and change it 2.5 for this case.
And very have.
Now the properties are assigned.
Let's get back to the drawing.
And let's see the effect.
Now here in this case we have some problems.
The scale of this line here.
In the case of circle is very large that we need to change.
So I'll type the scale that's for line type scale and the scale factor is set to 1.
Let's change to point to Phife and press enter and you can see that it really changes killed.
In this case we are not changing this came from the property panel but we are changing it using the
scale command.
So once again I'll type in the scale and I'll change to point one.
And that looks quite appropriate so you can use this also to change the scale of all of the geometries
which are present here in the drawing area.
Now we need to ensure that the line where it is visible for both of these objects so far that we simply
need to turn on this line with display and there we have it it's now visible.
So here we have the final drawing as required layer assignments.